3
When the data security kit is installed
When the data security kit is installed, the following icon
appears on the touch panel. Touch the icon (
) to view
information on the data security kit version.
When the data security kit is installed, data remaining in the machine is automatically
erased after each copy and fax job.
When data clearing begins, the following message appears for 6 seconds*.
* The duration of the message display can
be changed with the key operator
program, "MESSAGE TIME SETTING".
(See page 10 of the key operator's guide.)
Restrictions on tandem copying and tandem printing
Tandem copying and tandem printing operate as shown below based on the configuration
of the server machine and client machine (whether or not the data security kit is installed).
NOTE
If the machine power is turned off while image data is being cleared from the hard disk
drive or before jobs are finished, the data may not be completely erased. If you do not
wish to leave partially cleared data when the power is turned off, it is recommended that
you use the key operator program, "CLEAR ALL MEMORY" (page 6 of this manual), to
complete data clearing before turning off the power.
Client machine
Data security kit: Yes
Data security kit: No
Server
machine
Data security kit:
Yes
The tandem function can
be used. Data is cleared
from both the server and
client machines.
The tandem function
cannot be used.
Data security kit:
No
The tandem function can
be used. Data is cleared
from the client machine.
The regular tandem
function can be used.
DATA IS BEING CLEARED.
