Sharp AR-800 imager Скачать руководство пользователя страница 24

Страница: 24 / 181

Copying in the Continuous Feed Mode

2. USING THE REVERSING AUTOMATIC DOCUMENT FEEDER (Cont.)

Press the PROGRAM key on the display

panel.

The menu on the right appears.

Select the desired copy size, reproduction

ratio, exposure and copy quantity.

The automatic paper selection mode is set
as the default mode.

Place the originals on the original feed tray.

After aligning the edges of the originals, set
them face up on the original feed tray and
align the slides to the edges of the originals.

The number of originals you can load at a
time is shown below.
Letter, Letter-R, Statement-R : 60

Ledger : 30
Legal

: 35

Press the ADF key.

The document feeder menu on the right
appears.

Press the ADF key on the panel to select

continuous feed.

The ADF key is highlighted and set as the
default feed mode.

The display panel returns to the original
display.

Press the START key.

The originals are fed starting with the
lowermost one, copied and then exit onto the
original exit area.

Holder

Slides

Содержание AR-800 imager






















































































































































































Результаты поиска

Содержание AR-800 imager

Отзывы:

Sharp AR-800 imager, Руководство по эксплуатации, Страница: 24 / 181

Результаты поиска

Содержание AR-800 imager

Отзывы: