Sharp AR-800 imager Скачать руководство пользователя страница 160

Страница: 160 / 181

156

Set the staple cartridge.

Insert the cartridge until the claw catches it.

Note:

Repeat steps 1 to 11 if the test stapling
is not performed and "Set staple cartridge"
is displayed.

Reinstall the stapler unit in its previous

position.

Turn the blue lever 90 degrees to the right
to latch the stapler unit.

Confirm that the finisher is attached to the

copier, and that the paper size is set to any

size other than Statement-R.

A staple test cannot be performed when only
the Statement-R paper is available. So make
sure to set another size.

Close the front cover of the finisher.Test

stapling is automatically carried out at some

of 12 places of a blank sheet of paper as

in the right-hand figure.

No.12

No.3

No.2

No.1

Direction of
paper path

Staple
cartridge

8. REPLACING STAPLES (OPTIONAL) (Cont.)

Содержание AR-800 imager






















































































































































































Результаты поиска

Содержание AR-800 imager

Отзывы:

Sharp AR-800 imager, Руководство по эксплуатации, Страница: 160 / 181

Результаты поиска

Содержание AR-800 imager

Отзывы: