AR-5520 SIMULATIONS 7-23
51
02
Resist amount adjustment
Used to adjust the contact pressure of the machine resist roller and the RSPF resist roller onto the
paper.
(Operatin
g
procedure)
W
hen this simulation is executed, the current set value is displayed.
W
hen the [AUTO/TEXT/PHOTO] key is pressed, the following set items are changed sequentially.
Enter an adjustment value with the Numeric keys and press the [START] key, and the entered value
will be saved and a copy will be made. (Adjustment range: 1 ~ 99, Default: 50)
W
hen the [CA] key is pressed, the entered value is saved and the simulation is terminated.
Supported for the installed models only. Skipped for the models without installation.
53
08
SPF scanning position automatic
adjustment
(Only when the SPF/RSPF is
installed)
Place the white chart so that it covers both the SPF scan glass and the OC glass. Close the OC
cover.
W
hen this simulation is executed, the current adjustment value is displayed as the initial
display.
W
hen the [START] key is pressed, the mirror unit scans from the home position to the SPF
scan position with the current adjustment value displayed, and the SPF glass cover edge is
calculated from the difference between the SPF glass cover edge and the OC side document glass
CCD output level.
*
The default is 50, the adjustment range is 1 ~ 99, and the adjustment unit 1= about 0.127mm.
If the adjustment is completed normally, the adjusted value is displayed. If not, the Misfeed indicator
lights up with the current set value displayed.
W
hen the [START] key is pressed again with the
Misfeed indicator ON, the execution is repeated again.
W
hen the [Interrupt] key or the [CA] key is
pressed during execution, "- -" is displayed and the operation is canceled. The mirror returns to its
home position and the simulation mode is terminated. In the case when the [Interrupt] key is
pressed, the machine goes into the sub code input standby mode. In the case when the [CA] key is
pressed, all the lamps are turned off.
10
SPF document scan position
select setting
Setting is changed depending on whether the SPF unit and the SPF document glass holding section
are glass dirt prevention parts or not.
For the combination of this machine and the AR-RP10/AR-SP10, the set value is set to [1].
If the set value is changed to [0], black streaks may be produced on a copy paper due to dirt on the
SPF glass.
W
hen this simulation is executed, the current code number is displayed.
Enter a code number corresponding to the SPF unit to be used and press [START] key to save the
setting.
Though this setting is changed, the other adjustment values are not affected. (The set value remain
unchanged.)
W
hen replacing or installing the SPF unit, perform this simulation to set the position and then
execute the scan position automatic adjustment.
60
01
SDRAM (image memory area)
access check
Access check to the SDRAM is made.
W
hen this simulation is executed, the SDRAM check is started. Fusing execution. the start LED turns
OFF. If an error occurs, the following LED turns ON.
W
hen the operation is normally completed, the
START indicator is turned ON.
After completion of checking, press [CA] key to reboot the machine.
Main
code
Sub
code
Contents
Details of operation
LED
Adjustment mode
AUTO, 1st tray indicator
AUTO, 2nd tray indicator
AUTO, 3rd tray indicator
AUTO, 4th tray indicator
AUTO, Bypass tray indicator
AUTO, TEXT, PHOTO indicator
AUTO, TEXT indicator
AUTO, PHOTO indicator
TEXT, PHOTO indicator
TEXT indicator
1st tray paper feed
2nd tray paper feed
3rd tray paper feed
4th tray paper feed
Bypass tray
RSPF document feed (Front surface)
RSPF document feed (Back surface)
RSPF document (A5) paper feed (Back surface)
Duplex back surface
PS solenoid prior pulling time adjustment in manual
paper feed
LED
Display mode
AUTO indicator
TEXT indicator
SPF scan position automatic adjustment
SPF scan position manual adjustment
Code number
Mode
0
1
Set to the scan position equivalent to the old-type SPF unit (the previous
model of AR-SP6/RP6).
Set to the scan position for dirt prevention. *Default
LED
Display mode
Misfeed indicators
Paper required indicator
W
rite end error
Read end error
Содержание AR-5516
Страница 2: ......
