KEY OPERATOR PROGRAMS
36
CONTENTS
INDEX
TOP OF CHAPTER
36
LIST OF KEY OPERATOR PROGRAMS
A list of key operator programs for the printer feature is provided below. Factory default settings are indicated in boldface type.
The programs with the settings "On" and "Off" are set by pressing the OK key so that a check mark is displayed in the check box.
Program
Possible settings
Description
EXPOSURE LEVEL
1 -
3
- 5
Lightens or darkens printouts.
NOTICE PAGE
On
/ Off
Specifies whether a notice page will be printed when specified printing
is not performed because of a problem such as IMC memory full error.
ROTATED PRINT
On
/ Off
Enables/disables rotation of print image for printing onto A4R, B5R or
8-1/2" x 11"R paper.
FORCED OUTPUT
OF PRINT
On /
Off
Specifies whether printing onto another size paper determined by the priority
rule is performed when no tray with the specified size paper is installed.
AUTO TRAY
SWITCH
On
/ Off
Enables/disables automatic switching between paper trays containing the
same size paper in the same orientation during printing when paper runs out.
TRAY EXCLUDED
FROM ATS
NO
/ TRAY 1 /
TRAY 2 / TRAY 3* /
TRAY 4*
Specifies a tray which will not be used with the auto select setting for
paper source.
* The available settings reflect the installed trays.
EXCLUDE BYPASS-
TRAY FROM ATS
On
/ Off
Specifies whether the bypass tray is included in the trays selected with
the auto select setting for paper source.
DISABLE INTERRUPT
PRINT JOB
On /
Off
Disables printing from being interrupted by another function if this
program is set.
I/O TIMEOUT
1 sec. -
180 sec.
-
999 sec.
In the event that data is not received, printing is ended after the set
time.
