58
Time shift recording
You can record the programme you are watching to the
registered USB storage device.
Starting time shift recording
Press
REC
E
.
• The TV starts time shift recording.
NOTE
• You can also operate from the control panel by pressing
CONTROL
.
• You cannot switch the channel or the input source during
time shift recording.
•
Time shift + overwrites existing data when a new
recording starts.
• The TV starts overwriting data in order from the oldest
recorded data when the memory for the USB storage device
is full. Use a high capacity USB storage device when you
want to record longer programmes.
• During time shift recording, the TV cannot display photos or
play music from the internet, Home network, or USB storage
devices.
• You cannot record programmes that have a copy control
signal that prohibits recording (they can only be watched on
the TV).
Completing time shift recording
1
Press
REC STOP
H
.
• The screen prompt pops up.
2
Press
c
/
d
to select “Yes”, and then press
?
.
• Time shift recording has completed.
NOTE
• You can also operate from the control panel by pressing
CONTROL
.
Time shift timer setting
You can set the time shift timer setting for programmes
you want to record.
NOTE
• To prevent the first part of the programme from being cut,
start recording the programme a few seconds earlier than
time set to start recording.
• When recording/viewing timer settings are set continuously
for multiple programmes, schedule the recording of the
previous programme to end earlier than the end of the
programme itself. Recording/viewing timer setting of the next
programme will start after that.
• A message will be displayed when the scheduled time
overlaps with an existing schedule. Make changes in
accordance with the on-screen instructions.
• It is not possible to newly schedule a recording that overlaps
with a timer setting that is currently running (recording). When
urgent setting of a schedule is desired, stop recording before
scheduling.
• Only one time shift timer setting can be set.
• A combined total of 16 timer settings (“Watch” and “Time
shift”) can be set.
EPG timer setup
You can select the programme you want to record and
set the timer setting with EPG (Pages 22 to 25).
Manual timer setting
“Manual timer setting” enables you to set date, recording
start/stop time and channel.
1
Press
GUIDE
.
2
Press
B
to display the timer list.
3
Press
B
again to display the “Manual timer
setting” screen.
4
Set date, recording start/stop time and channel.
5
Press
c
/
d
to select “Time shift”, and then press
?
.
• A confirmation screen will be displayed for the timer
setting.
6
Press
c
/
d
to select “Yes”, and then press
?
.
NOTE
• When the country setting is set to “New Zealand”, you
may not display a Timer list screen in the above mentioned
procedure. You can display the Timer list screen from
“HOME” > “TV Menu” > “EPG” > “Timer list”.
Manual clock setting
When the TV cannot receive the time via digital
broadcast, perform “Manual timer setting” after setting
the clock.
Go to “HOME” > “TV Menu” > “View setting”
> “Individual setting” > “Clock setup” > “Time
adjustment”.
NOTE
• You cannot set the manual clock setting during time shift
recording.
Timer list
A list of programmes scheduled for recording can be
displayed.
1
Press
GUIDE
.
2
Press
B
to display the timer list.
NOTE
• When the country setting is set to “New Zealand”, you
may not display a Timer list screen in the above mentioned
procedure. You can display the Timer list screen from
“HOME” > “TV Menu” > “EPG” > “Timer list”.
Other useful features
LC60LE640X_EN_book.indb 58
LC60LE640X_EN_book.indb 58
9/10/2012 2:48:38 PM
9/10/2012 2:48:38 PM
