36
Picture
Advanced
This TV provides various advanced functions for
optimising the picture quality.
Go to “HOME” > “TV Menu” > “Setup” > “Picture”
> “Advanced”.
C.M.S.-hue
This function adjusts the hue of a selected colour using a
six-colour adjustment system.
C.M.S.-saturation
This function increases or decreases the saturation of a
selected colour using a six-colour adjustment system.
C.M.S.-value
This function adjusts the brightness of a selected colour
using a six-colour adjustment system.
Colour temp.
Adjusts the colour temperature to give the best white
image.
Item
High
White with bluish tone.
Mid-High
Intermediate tone between “High” and
“Middle”.
Middle
Natural tone.
Mid-Low
Intermediate tone between “Middle” and
“Low”.
Low
White with reddish tone.
10 point setting*
Finely adjusts each colour temperature
between 1 to 10 points.
R/G/B Gain (LO),
R/G/B Gain (HI)
Adjusts the white balance by changing the
value of each item.
* “10 point setting” is available only when selecting
“STANDARD”, “MOVIE”, “STANDARD (3D)”, or “MOVIE (3D)”
from the “AV mode” menu.
AQUOMOTION
“AQUOMOTION” technologies provide superior solutions
for digital display picture quality removing motion blur
(“AquoMotion 200/240”, “High”, “Low”, “Off”).
NOTE
• This effect is greater on fast moving images.
• This function will have no effect in the following cases.
1) The type of signal received is a PC signal.
2) An OSD is being displayed.
3) Teletext is activated.
• If images appear blurred, set to “Off”.
Gamma adjustment
Selects the tone difference of the brightness and
darkness of the image according to the type of
programme watched from a maximum of
e
2 to a
minimum of
f
2.
Film mode
Automatically detects a film-based source (originally
encoded at 24 or 25 frames per second, depending on
the vertical frequency), analyses it and then recreates
each still film frame for high-definition picture quality.
Item
Advanced
Adjust effect to reduce judder from film
contents. Select a desired level of judder
reduction from 0 to +10.
Standard
Detects, analyses, converts film source.
Off
Normal viewing mode.
NOTE
• Film mode is not selectable depending on the input signal
type.
Active contrast
Automatically adjusts the contrast of an image according
to the scene.
DNR (Digital Noise Reduction)
“DNR” produces a clearer image (“Auto”, “High”,
“Middle”, “Low”, “Off”).
NOTE
• This function may not be available depending on the input
signal type.
Basic adjustment
LC60LE640X_EN_book.indb 36
LC60LE640X_EN_book.indb 36
9/10/2012 2:48:28 PM
9/10/2012 2:48:28 PM
