Sharp AQUOS LC-60EQ30U, Руководство по обслуживанию

Страница: 39 / 74

LC-60/70EQ30U
5 – 16
10.INPUT MODE FIXED
11. RC_PATH_THROUGH
12.AV POSITION FIXED
13.LOUD SPEAKER (ON/OFF)
14.232C POWON
Selection Selection between “Variable”, “Fixed”, “ACON (AC CTRL)” and “AC/RCON (AC/RC CTRL)”
Default –(Variable)
Explanation
•
At the “Fixed”setting, the TV set gets started with the settings of “Input mode start”, and then any other channels
and inputs are not accepted.
•
At the “ACON (AC CTRL)”setting, the TV set gets started with the settings of “Input mode start” under AC control.
•
At the “AC/RCON (AC/RC CTRL)” setting, the TV set gets started with the settings of “Input mode start” under
either control.
Limit in Setting
•
The following keys are invalidated.
CH / , direct tuning button, FLASHBACK, input
However, the keys (input switching and CH / keys) of the unit for menu operation remain valid.
Exception None
Remarks
•
In the following case, setting is cancelled and mode is changed to “Variable”.
When the setting of “Input mode start” is set to “Normal”.
Selection Selection between “OFF”, “ON: TV RCE” and “ON: TV RCD”
Default OFF
Explanation Function to feed the remote controller-received signal to Pin 9 (open) on the RS232C.
Limit in Setting None
Exception None
Remarks When the setting is “ON: TV RCD”, TV doesn't respond to the RC operation.
Selection Selection between “Variable” and “Fixed”
Default Variable
Explanation In case of “Fixed” setting,
–Menu “Picture” and “Audio” setting can't be changed like “Dynamic (Fixed)”.
–When “AV Mode” key is pressed, TV just displays current AV Mode (cannot be changed.).
Limit in Setting None
Exception None
Remarks
•
When receiving AV Position key and other direct audio select keys, the current display stays on and no setting can
be changed.
Selection Selection between “ON” and “OFF”
Default ON
Explanation If “OFF” is selected, TV stops Speaker output even without Headphone connected.
Limit in Setting None
Exception None
Remarks
•
Press the volume UP/DOWN key, and the mute icon appears for 4 seconds.
•
The mute key and audio-related keys are displayed with caution.
•
Usually, the audio outputs can be adjustable.
Selection Selection between “Disable” and “Enable”
Default Enable
Explanation In the standby mode, the power-on by the 232C command is enabled or disabled.
Limit in Setting None
Exception None
Remarks The setting by "RSPW" RS-232C/IP control command has prioriy overthis setting.