Sharp AQUOS LC-42PD7X, Руководство по эксплуатации

Страница: 49 / 64

47
Useful adjustment settings
Audio Only
When listening to music from a music programme, you
can set the display off and enjoy audio only.
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Option”.
2
Press
a
/
b
to select “Audio Only”, and then
press ENTER .
3
Press
c
/
d
to select “On”, and then press
ENTER .
4
DNR (Digital Noise Reduction)
Produces a clearer video image.
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Option”.
2
Press
a
/
b
to select “DNR”, and then press
ENTER .
3
Press
a
/
b
to select the desired level, and
then press
ENTER
.
4
Off
High
Low
NOTE
• When you make operations that change the picture on the
TV such as by changing the input source, the Audio Only
function is set to “Off”.
Selected item
On
Off
Description
Audio is output without screen image.
Both screen images and audio are output.
To watch an HDMI equipment image, select
“INPUT3” or “INPUT4” using
TV/VIDEO on the
remote control unit or on the TV.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “Option”.
3
Press
a
/
b
to select “HDMI Setup”, and then
press ENTER .
• The HDMI Setup can be selected only when
“INPUT3” or “INPUT4” is selected.
4
MENU
[Option ... HDMI Setup]
Option
Audio Only
DNR
HDMI Setup
[Off]
HDMI Setup
HDMI (High-Defi nition Multimedia Interface) terminal
selection.
Press
a
/
b
to select the desired item, and
then press ENTER .
5
RGB/
YCbCr4:4:4/
YCbCr4:2:2
Enable/
Disable
Digital/
Analogue
Select the video signal type
from the HDMI terminal.
Set whether or not to use
WIDE MODE based on signal
recognition, including an HDMI
signal.
Select “Digital” for audio signal
via the HDMI terminal.
Select “Analogue” for audio
signal via the AUDIO jack.
Signal
Type
Auto View
Audio
Select
HDMI Setup
items
Selectable
items
Description
NOTE
• Refer to your external equipment operation manual for the
signal type.
• Item under “Signal Type” can be selected when the
equipment is connected with a DVI-HDMI conversion cable.
• When the equipment is connected with an HDMI cable,
items are automatically set and cannot be selected.
• “Audio Select” is only available for INPUT4.
Press
a
/
b
/
c
/
d
to select the desired setting,
and then press ENTER .
6
42PD7X_en_g.indd 47 42PD7X_en_g.indd 47 2007/01/12 15:49:10 2007/01/12 15:49:10