Sharp AQUOS LC-42PD7X, Руководство по эксплуатации

Страница: 42 / 64

INPUT 3 (HDMI1)
INPUT 4 (HDMI2)
INPUT 5 (DVI)
Yes No
40
Input Skip
This setting allows you to skip the HDMI or DVI input
on the “Input Select” menu.
Useful adjustment settings
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Press
a
/
b
to select “Input Skip”, and then
press ENTER .
3
Press
a
/
b
to select the Input (INPUT3,
INPUT4 or INPUT5) you wish to skip, and then
press
ENTER .
4
Press
c
/
d
to select “Yes”, and then press
ENTER .
5
Press MENU to exit.
6
Input Signal (PC input mode only)
• Some input signals may have to be registered manually to
display properly.
• The pairs of input signals (resolutions) in the list below are
not distinguishable when received. In such case, you have
to set the correct signal manually. After setting once, it will
display when the same signal (resolution) is input again.
1024 x 768 1360 x 768
NOTE
• You can only select the “Input Signal” on the Setup menu
when receiving one of the 2 input signals listed above.
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
1024 x 768
1360 x 768
Press
a
/
b
to select “Input Signal” and then
press ENTER .
3
Press
a
/
b
to select the desired input signal
on the display.
4
(Example)
42PD7X_en_g.indd 40 42PD7X_en_g.indd 40 2007/01/12 15:49:00 2007/01/12 15:49:00