Sharp AQUOS LC-40LE814E, Руководство по эксплуатации

Страница: 37 / 74

35
Basic adjustment
E
Manual adjust
Configure various settings for each service using the
colour ( R / G / Y / B ) buttons.
Service
no.
Lock
Service
name
Lock CH skip Old LCN
CH skip Sort Delete
1
Press
a/b
to select the desired service.
2
Press the colour button on the remote control
unit corresponding with the item you want to
reconfigure.
• The
✔
mark indicates the operation is set to on. Each
time the colour button is pressed, you can switch the
corresponding operation on/off.
Buttons for “Manual adjust” operation
Lock Press R button.
When the service is locked, you must enter your
PIN whenever you tune to the service.
CH skip Press G button.
Services with a
✔
mark are passed over when
pressing
:r/s
on the TV or remote control unit.
Delete Press Y button.
The selected service is deleted. If you want to
watch the service you deleted once again, perform
“Auto installation”, “Additional search”, or “Manual
search”.
Sort Press B button.
The item position of services can be sorted.
1
Press
a/b
to select the service whose
item position you want to move, and then
press
;
.
2
Press
a/b
to move it to the desired
position, and then press
;
.
3
Repeat steps 1 and 2 until all desired
service items are sorted.
Cable
You can reconfigure the following settings when you
select “Cable” in the initial auto installation or the “Auto
installation” menu.
E
Additional search
Use this menu to add new services automatically after
“Digital search” in the “Auto installation” menu has been
completed. Follow steps
1
to
5
in Searching for
cable broadcasts on page 14.
E
Manual search
Add new services within a specified frequency band.
After setting the items on the following screen, the TV
starts searching.
• Refer to the table about menu items in the right column
on page 14.
Frequency
Symbol rate
QAM modulation
Search start
MHz
E
Manual adjust
This function is the same as in “Terrestrial”. Refer to
“Manual adjust” in “Terrestrial”.
H
• You can only reconfigure the “Manual adjust” settings.
• You can only set the “Lock” setting in “Manual adjust”.
Satellite setting
Before selecting the type of search in “Satellite setting”,
you need to select the satellite broadcast.
SAT2 [Hot Bird 13E]
SAT3 [None]
SAT4 [Turksat]
E
Additional search
Use this menu to add new services automatically after
auto installation has been completed. Follow steps 1 to 6
in the right column on page 15.
E
Manual search
Add new services within a specified frequency band.
After setting the items on the following screen, select
“Yes” from “Search start” menu.
Band [Vert/Low]
Frequency
Symbol rate
Search start
Vert/High
Horiz/Low
Horiz/High
Vert/Low
E
Manual adjust
This function is the same as in “Digital setting”. Refer to
“Manual adjust” in “Digital setting”.