Sharp Aquos LC-32WT1E, Руководство по обслуживанию

Страница: 117 / 202

10 - 1
LC-32WD1E/S/RU, LC-37WD1E/S/RU, LC-42WD1E/S/RU, and LC-32/37/42WT1E
CHAPTER 10. SCHEMATIC DIAGRAM
[1] DESCRIPTION OF SCHEMATIC DIAGRAM
COMPONENT VALUE AND PARTS LIST
1. For the correct value and/or type number of components,
always refer to the parts list. Values and type number in the
schematics are for reference only.
RESISTOR
1. For resistors value the "Ω" is omitted:
100R = 100Ω, 10K = 10KΩ, 1M = 1MΩ
2. For resistor power rating and tolerance
refer to the parts list.
CAPACITOR
1. For capacitor values in the schematics
the "F" is omitted:
10p = 10pF, 10n = 10nF,10
μ
= 10
μ
F
2. For capacitor voltage rating refer to
the parts list.
SAFETY NOTES:
1. DISCONNECT THE AC PLUG FROM THE AC
OUTLET BEFORE REPLACING PARTS.
2. SEMICONDUCTOR HEAT SINKS SHOULD BE
REGARDED AS POTENTIAL SHOCK HAZARDS
WHEN THE CHASSIS (SET) IS OPERATING.
WARNING:
IMPORTANT SAFETY NOTICE:
PARTS MARKED WITH “ ” ( ) ARE
IMPORTANT FOR MAINTAINING THE SAFETY OF THE
SET. BE SURE TO REPLACE THESE PARTS WITH
SPECIFIED ONES FOR MAINTAINING THE SAFETY AND
PERFORMANCE OF THE SET.
WARNING:
THESE CIRCUIT DIAGRAMS ARE THE ORIGINAL ONES,
THEREFORE THERE MAY BE A SLIGHT DIFFERENCE
FROM YOUR UNIT.
WARNING: