Sharp Aquos LC-32WT1E, Руководство по обслуживанию

Страница: 40 / 202

NO picture on display via EXT-2 RGB input
No picture on LCD screen when EXT-2 RGB input source selected
Checklist:
1) Is "INPUT SOURCE" button on the remote control set up correctly ? ==> See operation manual and set "INPUT SOURCE" to "EXT2"
2) Is MENU-PICTURE-Contrast/Brightness set to "MIN" ? ==> Set it to appropriate level
3) Check connection to external device ==> Connect it correctly as per the operation manual for the device
v
yes
Are RGB signals arriving to pins 15B(R), 11B(G) and 7B(B)
of SCART2 (X027-2) ? no
Check external connection, input setting, SCART2 and peripheral
circuits.
v
yes
are RGB signals arriving to video switch TDA8601 (D1302)
at pins 8, 7 and 6 ? no
check C1338(R), C1334(G), C1331(B) and check peripheral on
SCART2_RGB signals (termination R, ESD protection diode,…)
v
yes
are RGB signals arriving to both sides of C0178(R), C0176(G) and
C0165(B) ?
no
Check video switch TDA8601 (D1302) power supply (+8V_SW) and
peripherals
Check if SLCT_RGB_YPbPr is set correctly
v
yes
Is TDA15134E (D013) UOCV_DVCLK clock there
AND are the UOCV_DV(x) signals toggling? no
TDA15134E (UOCV) (D013) is not functioning normal,
check GTV SW and peripherals (power supply,xtal,…) of D013
v
yes
are UOCV_DV(x) and UOCV_DVCLK signals arriving to
the CPLD (D080) (XC2C128-7TQG144C) ? no
check resistor networks on UOCV_DV signals
v
yes
GOTO VIDEO PATH CHECK
LC-32WD1E/S/RU, LC-37WD1E/S/RU, LC-42WD1E/S/RU, and LC-32/37/42WT1E
6-9