86
Other viewing options
Twin picture functions
Allows you to display two pictures on the screen at
one time.
Twin picture in all cases
You can display two same-sized pictures except when
inputting from INPUT 4 (HDMI) and INPUT 5 (DVI-I)
terminals and CARD.
Press
TWIN PICTURE
.
• Twin picture displays and a selected input
source image displays.
Press
SELECT
to set either screen to be
active.
• “
z
” displays on the active screen, which has
sound output.
Press
TWIN PICTURE
to exit twin picture.
NOTE
• This function does not work under the following input
conditions:
1
INPUT 4 (HDMI)
2
INPUT 5 (DVI-I)
3
CARD
4
Two pictures from the same source (e.g. INPUT 1 and
INPUT 1)
5
An image will appear on the right side only if it is a 480i
signal.
*An SDTV image has a 480p signal, so it will not appear
either.
• When this function is not available, “No dual screen display
available” will display.
• Pressing
ANALOG-A, B, DIGITAL
while viewing in Twin
Picture mode (TV image and video image) with TV selected
will display the TV image of the other tuner.Picture and
still image
Picture and still image
You can display two same-sized pictures – one moving
and one still.
Press
FREEZE
.
• A moving image displays on the left screen and
a still image displays on the right screen. The
still image is one frame captured from a moving
image at the moment you press
FREEZE
.
Update the still image by pressing
ENTER
.
• Each time you press
ENTER
, the image on the
right screen updates.
• If a PC card with enough capacity is inserted
in the system, a message will appear on the
screen asking you whether to save the image.
Press
REC
on the remote control if you want to
save. (See page 44.)
Press
FREEZE
to exit still image.
NOTE
• This function does not work in INPUT 4 (HDMI), INPUT 5
(DVI-I) and CARD.
• When this function is not available, “No displaying still
image” will display.
• Another image can be saved if a PC card with enough
capacity is inserted in the system.
• The still image is automatically erased after 30 minutes.
• If you are using FREEZE and a broadcast activates the V-
CHIP BLOCK, FREEZE will cancel and a block message
will appear.
FREEZE
1
2
3
1
2
3
