background image

5

Preparation

Inserting the batteries

Before using the System for the first time, insert two “AA” size batteries (supplied) into the remote control. When the
batteries become depleted and the remote control fails to operate, replace the batteries with new “AA” size batteries.

Using remote control

Use the remote control by pointing it towards the remote sensor
window of the main unit. Objects between the remote control and
sensor window may prevent proper operation.

Cautions regarding use of remote control

Do not expose the remote control to shock. In addition, do not
expose the remote control to liquids, and do not place it in an area
with high humidity.

Do not install or place the remote control under direct sunlight.
The heat may cause deformation of the unit.

The remote control may not work properly if the remote sensor
window is under direct sunlight or strong lighting. In such a case,
change the angle of the lighting or main unit, or operate the
remote control closer to the remote sensor window.

B

OPC

Headphone jack

Remote control sensor indicator

OPC indicator

STANDBY/ON indicator

OPC sensor window

Remote control sensor window

+

+

_

_

1

Open the battery cover.

2

Insert two supplied “AA” size
batteries.

• Place batteries with their terminals

corresponding to the (

e

) and (

f

)

indications in the battery compartment.

3

Close the battery cover.

CAUTION

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions
below.
• Place the batteries with their terminals corresponding to the (

e

) and (

f

) indications.

• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or

cause chemical leakage in old batteries.

• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash.

If you find any chemical leakage, wipe thoroughly with a cloth.

• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from

it.

lc22ad1e_en_p01_12

04.2.2, 11:05 AM

5

Содержание AQUOS LC-22AD1E




































































Отзывы: