14
Changing channels
You can select channels using
0 – 9
or
CH
a
/
b
.
• To handle the increasing number of channels available, this LCD TV set allows you
to select up to 200 channels (0 to 199).
Using CH
a
/
b
Press
CH
a
and the channels change in the order shown below:
1
→
2
→
3
→
. . .
→
198
→
199
→
0
→
1
→
2
→
3
→
. . .
Press
CH
b
and the channels change in the order shown below:
3
→
2
→
1
→
0
→
199
→
198
→
. . .
→
3
→
2
→
1
→
. . .
NOTE
•
Channel “0” is reserved for RF output of VCR.
• Complete this procedure within 3 seconds, otherwise the selection will not be made on the 2-
digit channel mode.
When viewing Teletext information
View a page directly which is 3-digit page number from 100 to 899 by pressing buttons
0 – 9
.
Sound volume
To adjust the volume
|
Press
i
k
to increase the sound volume. The
bar indicator shifts right.
|
Press
i
l
to decrease the sound volume. The
bar indicator shifts left.
To mute the sound
|
Press
e
(Mute)
to temporarily turn off the sound.
“Sound off” is displayed.
|
Press
e
(Mute)
to turn off the Mute function.
“Sound on” is displayed.
NOTE
•
When
Volume
i
(
k
/
l
)
is pressed in the Mute mode,
the sound turns on and the volume indicator is displayed.
•
The Mute function is cancelled when
B
B
B
B
B
is pressed.
S o u n d o f f
S o u n d o n
Volume
5
0
Volume
1
0
Using 0 – 9 on the remote control unit
Select the channels directly by pressing buttons
0 – 9
.
When selecting the channel using
0 – 9
, finish inputting the channel number by holding
down the button for the last digit for a moment.
a
To select a 1-digit channel (e.g. channel 2):
• Press the
2
button.
To select a 2-digit channel (e.g. channel 12):
• Press
1
,
followed by
2
.
• When you enter the channel, a 3-digit input underbar appears in digital TV mode and a 2-digit in
analogue TV mode.
Once you input a channel it is set after a few moments if there are no other operations. Or press
OK
to set immediately after input.
Volume
(
i
l
/
k
)
CH
s
/
r
Basic operation
Control panel of the
main unit
Using Flashback (
A
) on the remote control unit
Press
A
to switch the currently tuned channel to the previously tuned channel.
Press
A
again to switch back to the currently tuned channel.
lc22ad1e_en_p13_20
04.2.2, 11:07 AM
14
