p
Basic Operation
Listening to the playback sound
INPUT
/-
Power indicator
• Lit in green (unit is operating)
• Lit in red (unit is in stand-by mode)
POWER
1
Turn on the connected equipment.
2
Press
POWER
to turn the power on.
The power indicator lights up green.
Lit in green
3
Select the source to be playback.
Main unit operation:
Press
INPUT
repeatedly to select a source.
(Before doing this, wait until a source is shown on the
top row of the display.)
• Each push of the button cycles through the following
settings.
(Actual operation will lag slightly behind the display.)
HDMI1
HDMI2
AUX1
AUX2
AUX3
AUX4
Display (top row)
Remote control operation:
To select a source, press the corresponding button.
4
Press the play button of the connected
equipment.
5
Adjust the volume level with
VOLUME
+/-
.
6
Enjoy surround sound or various qualities.
7
After
use:
Press
POWER
to enter the stand-by mode.
The power indicator lights up red.
Lit in red
NOTE
• Reduce the volume level with
VOLUME
+/-
before entering the
stand-by mode.
19
AN-ACS1U̲en.indb 19
AN-ACS1U̲en.indb 19
2008/01/07 18:06:36
2008/01/07 18:06:36
