18
General control
Volume control
Main unit operation:
Press
to increase the volume and
VOLUME -
for
decreasing.
Remote control operation:
Press
to increase the volume and
VOLUME -
for
decreasing.
Muting
The sound is muted temporarily when pressing
MUTE
on the
remote control.
Press again to restore the sound.
NOTE
• When you press another button, muting is canceled.
However, it is not canceled if
INPUT
or
MENU
is pressed.
• When the unit is tuned off and back on again, muting is canceled.
Subwoofer control
The subwoofer level can be adjusted.
Press
SUBWOOFER LEVEL
.
• The current subwoofer level setting is shown. When you
press the button again while the level is shown (within 3
seconds), you can change the subwoofer level.
To increase the level, press
SUBWOOFER LEVEL +
.
To decrease the level, press
SUBWOOFER LEVEL -
.
Shown for about 3 seconds
• If the subwoofer level is too high, resulting in distortion, you
should lower the level.
To change the tonal quality of the sound
You can choose among three sound modes for the tonal
quality.
Press
TONE
.
• The current sound mode is shown.
When you press the button again while the mode is shown
(within 3 seconds), you can change the sound mode.
• Each push of the button cycles through the following settings.
NORMAL
HEAVY
LIGHT
Shown for about 3 seconds
To dim the display
1
Press
MENU
.
2
Use
c
/
d
to select
“DIM”.
3
Use
a
to select “ON”
and press
ENTER
.
• The display will be turned off.
• If DVS or Audistry has been selected, the respective sound
mode icon will be shown also while the display is off.
• If a button is pressed while the display is dimmed, the
current setting will be shown for 3 seconds, and then the
display goes off again.
To cancel the setting
Use
b
to select “OFF” and then press
ENTER
.
AN-ACS1U̲en.indb 18
AN-ACS1U̲en.indb 18
2008/01/07 18:06:35
2008/01/07 18:06:35
