14
Connecting a TV (with HDMI connector)
AQUOS LINK
Use both the optical digital cable and HDMI cable for the connection.
To use the AQUOS LINK function (pages 24 - 27), connect the audio signal of the TV to the AUX1 connector. If AUX2 is used,
you must manually select the AUX2 input.
Rear panel
(amplifier part)
To HDMI OUTPUT
(TO TV) connector
HDMI cable
To HDMI input connector
To DIGITAL AUDIO
INPUT (OPTICAL)
connector (AUX1)
To DIGITAL AUDIO
output (optical) connector
Optical
digital cable
HDMI
Insert cable until you hear a click.
TV
AUDIO
DIGITAL
Connect both
cables
Cables to use
Optical digital cable (supplied)
HDMI cable (supplied)
If the cable is equipped with a protective
cap, remove it before making the
connection.
NOTE
• If only the HDMI cable is used for the
connection, the sound of the TV cannot
be reproduced by the AQUOS AUDIO
system. To reproduce the sound of the
TV with the AQUOS AUDIO system, the
optical digital cable must be connected.
• When connecting an HDMI CEC-enabled
AQUOS TV or similar component, the
AQUOS LINK function can be used.
(Pages 24 - 27)
Connecting a TV (without HDMI connector)
Use the optical digital cable for the connection.
If the TV does not have a digital audio output, use regular audio cable to make an analog connection.
Insert cable until you hear a click.
TV
Rear panel
(amplifier part)
To AUDIO output jacks
or
To DIGITAL AUDIO INPUT
(OPTICAL) connector
(AUX1 or AUX2)
To DIGITAL AUDIO
output (optical) connector
To AUDIO INPUT
connectors
(AUX3 or AUX4)
Audio cable
AUDIO
L
R
Optical
digital cable
AUDIO
DIGITAL
Make one of these
connections (not both)
Cables to use
Optical digital cable
(supplied or commercially available)
Audio cable (commercially available)
If the cable is equipped with a protective
cap, remove it before making the
connection.
Connections
Left (white)
Right (red)
Left (white)
Right (red)
AN-ACS1U̲en.indb 14
AN-ACS1U̲en.indb 14
2008/01/07 18:06:34
2008/01/07 18:06:34
