Sharp AL-1216, Руководство по эксплуатации

Страница: 30 / 84

28
* Factory default settings are indicated with an asterisk (*).
5
Press the start ( ) key. The right-hand number in the display
will be steadily lit and the entered value will be stored.
6
Press the light ( ) or dark ( ) key to return to the normal
copy mode.
DISPLAYING TOTAL NUMBER OF COPIES
Use the following procedure to display the total number of copies.
1
Press the clear ( ) key to reset the display to zero.
2 Press and hold down the clear ( ) key for approximately 5
seconds. The total number of copies will appear in two steps,
each with three digits.
Example: Total number of copies is 1,234.
Program
No.
Mode Parameters
1 Auto clear time
0 OFF, 1 10sec., 2 30sec.
*3 60sec., 4 90sec., 5 120sec.
2 Preheat mode *0 30sec., 1 60sec., 2 90sec.
3
Auto power shut- off
timer 0 2min., *1 5min., 2 15min.
3 30min. 4 60 min. 5 120min.
4
Stream feeding
mode
0 OFF, *1 ON
5
Auto power shut- off
mode
0 OFF, *1 ON
6
Resolution of AUTO
& MANUAL mode
*0 300dpi, 1 600dpi
Program No. 4 can be selected on the AL-1225.
To change the setting or to set another mode, press the clear
(
) key. The unit will return to step 2.