Sharp AL-1216, Руководство по эксплуатации

Страница: 28 / 84

26
This chapter describes the special functions of this unit. Use these functions as
needed.
DESCRIPTION OF SPECIAL FUNCTIONS
Toner save mode (page 26)
Reduces toner consumption by approximately 10%.
Power save modes (page 27)
The unit has two power save modes of operation: preheat mode and auto power
shut-off mode.
Preheat mode
When the unit enters the preheat mode, the power save ( ) indicator will light up
and other indicators will remain on or off as before. In this condition, the fuser in
the unit is maintained at a lower heat level, thereby saving power. To copy from
the preheat mode, make desired copier selections and press the start (
) key
using the normal copying procedure.
Auto power shut-off mode
When the unit enters the auto power shut-off mode, the power save ( ) indicator
will light up and other indicators will go out. The auto power shut-off mode saves
more power than the preheat mode but requires a longer time before starting
copying. To copy from the auto power shut-off mode, press the start (
) key.
Then make desired copier selections and press the start ( ) key using the
normal copying procedure.
Auto clear (page 27)
The unit returns to the initial settings a preset amount of time after the end of copy, or
scanner operation. This preset amount of time (auto clear time) can be changed.
Stream feeding mode (page 27)
For description of the stream feeding mode, see "Stream feeding mode" (p.21).
Resolution of AUTO & MANUAL mode (page 27)
You can set the copy resolution used for AUTO and MANUAL ( ) exposure
mode.
TONER SAVE MODE
1
Press the exposure mode selector key
to select the manual (
) mode.
5
SPECIAL FUNCTIONS