Sharp 3800M - B/W Laser - All-in-One Скачать руководство пользователя страница 12

Страница: 12 / 152

INSTALLATION

Checking packed components and accessories

Interface cable

Rapid key label

Power cord

Telephone line cord

Adapter

Paper tray

TD cartridge
(in a silver bag)

Drum cartridge
(installed in machine)

Operation manual
(3 pieces)

Software CD-ROM

Main unit

20/POLL

(provided according to destinations)

Open the carton and check to ensure that the following components and accessories
are included.

The life of the TD cartridge which has been included in the machine at the
factory is approximately 1500 sheets (A4 size paper at 5% toned area).

In some regions, the shape and type of the packing materials are different

from those shown above.
If anything is not included or is damaged, contact your Sharp dealer.
Save the carton and packing materials. These can be re-used for

transporting the machine, should it be necessary.

Installation

Warning

Note

Caution

Conventions used in this manual

In this manual, the following icons are used to provide the user with information
pertinent to the use of the machine.

Warns the user that injury to the user or damage to the copier may

result if the contents of the warning are not properly followed.

Cautions the user that damage to the copier or one of its components
may result if the contents of the caution are not properly followed.

Notes provide information relevant to the copier regarding specifica-

tions, functions, performance, operation and such, that may be useful
to the user.

Indicates a letter displayed in the display.

SUK 01 INSTALLATION LEO.p65

30/03/00, 17:45

Содержание 3800M - B/W Laser - All-in-One

























































































































































Результаты поиска

Содержание 3800M - B/W Laser - All-in-One

Отзывы:

Похожие инструкции для 3800M - B/W Laser - All-in-One

Бренды по названию

Популярные бренды

Sharp 3800M - B/W Laser - All-in-One, Руководство по эксплуатации

Результаты поиска

Содержание 3800M - B/W Laser - All-in-One

Отзывы:

Похожие инструкции для 3800M - B/W Laser - All-in-One

Бренды по названию

Популярные бренды