manualshive.com logo in svg

Sharp 32LF-94EC, Руководство по обслуживанию, Страница: 70 / 82

Поделиться
Скачать
Sharp 32LF-94EC Скачать руководство пользователя страница 70

 

46 

AK53 D.O.C. Service Manual 

 

22/03/2004

 

14.3.2.COLOR ADJUSTMENT 

Select Color Adjustment in Video menu by pressing “? /? ” buttons and press “? ” button to enter Color 
Adjustment menu. The following menu appears on the screen. 
 

COLOR ADJUSTMENT 

 

1 Y DEL SEC BG 

4 

2 Y DEL SEC DK 

4 

3 Y DEL SEC L 

4 

4 Y DEL SEC AV 

4 

5 Y DEL PAL BG 

0 

6 Y DEL PAL DK 

0 

7 Y DEL PAL I 

0 

8 Y DEL PAL M 

0 

9 Y DEL PAL AV 

0 

10 VIDDEC QTHR 

9 

11 VIDDEC STHR 

9 

 

14.3.2.1.Y DEL SEC BG, Y DEL SEC DK, Y DEL SEC L, Y DEL SEC AV:  

They are used to adjust Y-Delay for Secam till the color transients on the color bar of the pattern 
become as sharper and colors between transients do not mix with each other as possible.  
For other standards no need to adjust is done automatically within SW. 
 

14.3.2.2.Y DEL PAL BG, Y DEL PAL DK, Y DEL PAL I, Y DEL PAL M, Y DEL PAL AV :  

They are used to adjust Y-Delay for Pal till the color transients on the color bar of the pattern become 
as sharper and colors between transients do not mix with each other as possible.  
For other standards no need to adjust is done automatically within SW. 
 

14.3.2.3.VIDDEC QTHR, VIDDEC STHR  

They are not recommended to change. 

 
IF_PLL_F_F, IF_PLL_OFF_NEG, IF_PLL_OFF_POS 

They are not recommended to change. 
 

OSD CONTRAST, TELETEXT CONTRAST 

They are not recommended to change. 
 

TXT HOR SHIFT, PAT HOR SHIFT, FLASH PROTECT 

They are not recommended to change. 
 

Содержание 32LF-94EC



















































































Отзывы:

Нет отзывов