Sharp Shape USB3D, Инструкция по сборке

Страница: 5 / 8

5
Figure 9. The correct way
Figure 10. The wrong way
Figure 11. No nuts are needed for new design
Note : For the new design (after May 2014),
threads are made on the inner rod, so no nuts are
needed. For the old design, through holes are
made on the inner rod. As result, 4 nuts were
shipped in the packages.
Figure 12.
Figure 13.
Step 3.
Mount the U-bar to the inner rod. The way to
insert the bolts is shown in Figure 9. The wrong
way is shown in Figure 10. With the wrong way,
you feel you need nuts. See Note on left. The
finished part is shown in Figure 12.
Step 4.
Insert the inner rod with the U-bar into the outer
rod as shown in Figure 13 on the above.