420 774 335 397 www.sharks-shop.cz Stránka 24
Working environment and protective equipment!
• Use ear protectors or other ear protectors.
• Wear approved safety glasses with side shields under your
Welding helmet or face shield all the time in the work area.
• Wear complete body protection - oil-free protective clothing, leather gloves, thick
shirt, working trousers and high working boots.
• Do not heat on containers that are designed for flammable liquids or in closed
containers such as tanks, cylinders, tanks or pipes
• Do not swing the welding machine more than 35 °!
• Protect yourself from electric shock by means of insulation protection.
• If possible, wear non-flammable, dry insulating materials, dry rubber
mats, dry wood or plywood.
• Always unplug the input connector before working on the unit.
In the event of a malfunction, always contact the specialists!
• If you notice any problems during installation or operation, please follow
these instructions.
• If the manual fails to fully understand or fails to solve the problem, contact
your inverter supplier or the Sharks Service Center for professional help.
TECHNICAL SPECIFICATIONS
voltage/frequency: 230V/50Hz
power input: 6.0 kVA
output voltage at load: 65 V
rated welding current (MAG): 40-160 A
rated welding current (MMA): 20-160 A
power factor: 0.73
loss without load: 40 W
duty cycle: 60%
loader: 60% = 160 A, 100% = 130 A
Protection class: IP21S
insulation class: F
efficiency: 85%
MAG wire (diameter): steel: 0.8-1 mm; no gas: 0.9 mm
electrode diameter: 1.6-4.0 mm
usable electrodes: rutile, basic
adjustable voltage, current and welding sparks
ARC Force, IGBT
package weight: 14 kg
Product weight: 10 kg
package dimensions: 53x30x33 cm
Product dimensions: 46x21x33 cm
accessories: MIG burner, welding cable with earthing terminal, welding cable with electrode holder,
welding shield, brush/hammer, 2x nozzle, air hose 2m
