www.sharks-shop.cz servis: +420774335397, +420774416287
Stránka 17
Dear customer,
Thank you that you have purchased an Sewage submersible pumps with cutting blades Sharks . Your
new pump has been developed and manufactured by Steen QOS, Ltd., to meet the demands for high
standards, operational reliability, ease of use and user safety.
With proper care, will provide a stable and reliable performance. If used correctly and only for their
intended purpose hobby use, you will enjoy years of safe operation and reliable service.
NOTICE
Before using your new product SHARKS read these instructions on
operation and maintenance. Take extra attention to all warnings and
cautions.
Your SHARKS product has many features to make your work easier and
faster. In developing this tool, great attention was paid to safety, operation
and reliability with regard to simple maintenance and operation.
I. DESCRIPTION
1. Handle grip
2. Cable
3. Capacitor
4. Rotor Shaft
5. Stator
6. Screw
7. Mechanical seal
8. Adapter
9. Pump body
10. Impeller
11. Pump base
12. Float switch
II. TECHNICAL PARAMETERS
voltage/frequency:
230V/50Hz
performance:
1100 W
flow:
18 m³/h
max. displacement:
12 m
max. submersion depth:
5 m
cable length:
9 m
pump housing:
cast-iron
impeller:
cast-iron
motor-housing:
stainless steel
motor-wire:
copper
mechanical plug:
silica
arbor:
45 # steel
insulation class:
B
protection class:
IP 68
max. temperature:
40°C
base incl. node diameter:
30 cm
output throat:
50 mm (2“)
weight:
21 kg
III. USE
The pump must be connected to a shockproof socket connected according to the relevant regulations.
The socket must provide 230V / 50 Hz. Fuse least 6 A.
