420 774 335 397 www.sharks-shop.cz Stránka 41
Generator operation
1. Make sure the connected loads are turned off. Start the engine.
2. Connect appliances to the outlets and paying attention to it, not to exceed the maximum permissible
load generator to starting capacity needs of individual appliances. If you are not sure of the
acceleration capacity of the appliance immediately contact the service Sharks.
3. Turn the circuit breaker and make sure that it is turned on.
WARNING: Generators must be loaded to the max. Permissible load if you are not satisfied with good
cooling. When using a generator in a deteriorated condition, load the generator to the maximum.
RECOMMENDATION: IDEAL CONDITIONS FOR OPERATION OF POWER GENERATORS ARE:
• Atm. Pressure: 1000 hPa (1 bar)
• Temperature: 25°C
• Humidity: 30%
OPERATION AT HIGH ALTITUDES
At high altitudes, there is a change ratio of saturation of the fuel mixture towards supersaturation. This
has resulted in both loss of power and increased fuel consumption.
DESCRIPTION (illustrative picture)
1. fuel tank
2. exhaust muffler
3. fround connection terminal
4. alternating current socket
5. engine oil plug ruler
6. alternating current circuit breaker
7. engine switch
8. wind-clock door
9. starting handle
10. fuel valve
11. ait filter
12. pipe frame sparking plug
13. sparking plug
14. cover of fuel tank
Generator is ready
for permanent connections
230V/50Hz, which can be done only
by an authorized person in
accordance with DIN (connection of
terminals U, V, W, N)
Max. generator power 5500 W
400V/50Hz
Max. generator power 1800 W
230V/50Hz
