420 774 335 397 www.sharks-shop.cz Stránka 46
CARE AND MAINTENANCE
• Your Sharks saw is maintenance-free. Occasionally clean the cover and handle with a
damp cloth soaked in detergent. However, do not use solvents that can damage the tool
cover.
• In any case, do not allow water to enter the tool.
• If you do not use the saw blade, place it on a flat surface mounted on the battery.
• When moving the saw blade, switch the rotary direction switch to the center position
blocking or closing. unintentional startup.
WARNING: Make sure the air vents of the engine in the body of the saw are not dirty or
dusty. This prevents the tool from overheating and keeps its full functionality longer!
Failure to do so may result in irreparable damage to the electric motor!
RECOMMENDATIONS: Perform regular breaks! Longer stroke of the drill at low speed
may result in overheating due to insufficient engine cooling by air flow. For this
reason, keep a regular break. Extend the lifetime of the tool!
RECOMMENDATIONS
: Perform regular breaks! Longer running of the saw at low speeds
may result in overheating due to insufficient engine cooling by air flow. For this reason, keep
a regular break. Extend the lifetime of the tool!
• Use only original spare parts and accessories, replacement parts may be performed by an
authorized Sharks Service.
• If your tool has been heavily loaded, has been worn out and has to be replaced or is not
being used for any further use, you must place the tool in the recycling center for disposal.
