420 774 335 397 www.sharks-shop.cz Stránka 35
Dear customer,
Thank you for purchasing the saw Sharks SH 2500 model Li-Ion. Your new battery saw was
developed and manufactured by Steen QOS, s.r.o., to meet the demands of high standards,
operational reliability, ease of operation and user safety.
With proper care, it will provide you with stable and reliable performance. If you use it
properly and only for the purpose of hobby use, you will enjoy years of safe operation.
NOTICE
Before using your new SHARKS product, read this Owner's Manual
carefully. Pay special attention to all WARNINGS and WARNINGS.
Your SHARKS product has many features to make your work easier and
faster. When developing this product, great attention has been paid to
safety, operation and reliability, with a view to simple maintenance and
operation.
SAFETY WARNINGS AND INSTRUCTIONS
WARNING! Read all the instructions in this manual carefully.
Failure to follow the instructions may result in electric short circuit, fire or serious
injury.
1) Work area safety
● Keep work area clean and well lit. Cluttered or dark areas invite accidents.
● Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
● Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
● Do not drill, fasten or break into existing walls or other blind areas where electrical wiring
may exist. If this situation is unavoidable, disconnect all fuses or circuit breakers feeding this
work site.
● Use a detector to localize matallic and power line. If you have doubts contact qualified
electrician or your network operator.
2) Electrical safety
● Power
tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
● Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
● Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
● Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
● When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
● If operating a power tool in a damp location is unavoidable, use a ground fault circuit
interrupter protected supply. Use of a ground fault circuit interrupter reduces the risk of
electric shock.
3) Personal safety
