sharkclean .com
sharkclean .com
USING THE
SHARK ION™ ROBOT
BUTTONS AND INDICATOR LIGHTS
DOCK BUTTON
Press to stop cleaning
and send robot back
to the charging dock.
CHARGE INDICATOR LIGHTS
Display the amount of charge
remaining in the battery.
“!” ERROR INDICATOR
See Troubleshooting section
for full list of error codes.
WI-FI INDICATOR
Blue light: connected to
Wi-Fi.
Red light: not connected.
Flashing blue: setup mode.
No light: not set up yet.
USING THE
SHARK ION™ ROBOT
MANUAL CLEANING MODE
To manually start a cleaning cycle, press the
Clean
button on the robot or on the mobile app. To stop
the robot before it finishes cleaning and automatically
returns to the dock, press the button again.
INSTALLING THE SIDE BRUSHES
The 2 included side brushes snap onto the square
pegs on the bottom of the robot. Press brushes
down onto the pegs until they click into place.
IMPORTANT:
Before cleaning an entire room for the first time, we recommend that you first test your robot on a small
section of the floor to ensure there is no scratching.
IMPORTANT:
Robot uses cliff sensors to avoid stairs and other steep drops. Sensors may work less effectively when they
are dirty. For best results, clean sensors regularly.
TIP:
To preserve battery life, turn off the power switch if robot will not be used for a long period of time.
TIP:
To preserve battery life, unit should be recharged at least once every three months.
CLEAN BUTTON
Press to begin a long-
running cleaning session.
Press again to stop.
MAX MODE BUTTON
Press to begin a
powerful cleaning.