4
TOLL FREE: 1-800-798-7398
5
www.sharkclean.com
6
12
HOURS
18
IMPORTANT: Before you can start using your new
cordless floor and carpet cleaner, charge it for 24
hours.
NOTE: The charging adapter and lower handle will be
shipped inside the packaging.
ASSEMBLE
1
Insert the smaller end of the
lower handle into the top of the
unit. Push until firmly in place.
Assemble the upper and lower
poles into the elbow joint to
form the Shark
®
Backsaver
™
folding handle. Then insert it
into the top of the lower handle.
(
Fig. 1
)
5
The Shark
®
Backsaver
™
folding
handle makes cleaning under
furniture a breeze. Just press
the button on the handle with
your thumb to engage the
Shark
®
Backsaver
™
function.
(
Fig. 4
)
EMPTY
6
When you’re finished cleaning,
pull the dust container straight
out from the side. (
Fig. 5
)
NOTE:
Be careful not to
accidentally turn the unit on.
Fig. 1
Fig. 2
Fig. 3
Fig. 6
Fig. 4
QUICK START
CLEAN
2
Pull back on the handle and
press lightly on the body of the
unit with your foot to engage the
steering. (
Fig. 2
)
3
Using your foot, press the
power button and push the unit
forward over the surface you
wish to clean. (
Fig. 3
)
4
Press the speed button on the
right with your foot to change
the speeds. One light indicates
the speed optimized to clean
bare floors and two lights
indicate the speed optimized to
clean carpets and larger debris
on bare floors.
7
Empty dust container contents.
(
Fig. 6
) If desired, you may
rinse with water to clean
the dust container - but dry
thoroughly before replacing.
When finished, replace the dust
container.
Fig. 5
24
V1945Z_32_ENG_IB_100929.indd 4-5
29/09/10 2:32 PM
