background image

PRECAUTIONARY MEASURES

Important

:

If the suction opening in the unit, the hose or the extension tube become 
blocked, switch off the vacuum cleaner and remove the blocking 
substance before you start the unit again.

1.

Do not operate the vacuum 
cleaner to close too heaters, 
or radiators.

5.

When pulling out the power plug 
from the wall outlet, pull the plug 
not the power cord.

BAGLESS UPRIGHT VACUUM

TO ORDER REPLACEMENT FILTERS OR BELTS

for Model UV219CS

Call:

1 (800) 798-9398

Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time

or

visit our website: www.sharkvac.com

6.

Do not pick up anything that is 
burning or smoking such as 
cigarettes, matches or hot ashes.

2.

Before inserting the power plug 
into the wall outlet, make sure that 
your hands are dry.

7.

Do not run appliance over power 
cord.

FOR TECHNICAL SUPPORT

for Model UV219CS

Call:

1 (800) 798-7398

Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time

3.

Do not vacuum any liquids.

Please Note:

Filter Ring, Secondary Filter, Pre-Motor and Exhaust Filters are washable. 

They should however be replaced every three (3) months to ensure peak 

performance of your vacuum.

The HEPA Dust Cup Filter may be washed. It should, however, be 

replaced every three (3) to six (6) months, depending on amount of use, to 

ensure peak performance of your vacuum. We recommend washing it 

once a month or when suction appears to be reduced. To wash your HEPA 

Dust Cup Filter, hold filter cartridge by frame flange and rinse under a tap 

until all observable dirt has been removed. Some discoloration of the 

HEPA filter material may occur, this is normal and will not affect the filter's 

performance. When finished, shake off excess water. Do 

NOT

wash in 

dishwasher.

It is important that when you wash the HEPA dust cup filter, you allow it to 

dry 

COMPLETELY

before using again. We recommend 24 hours to air 

dry. 

DO NOT DRY IN DRYER

.

Important:

Make sure that ALL the Filters are 

completely

dry before inserting back in 

the vacuum.

8.

Do not use without dust cup 
filter or filters in place.

9.

Before you start vacuuming, 
make sure to remove large or 
sharp objects that might 
damage the vacuum.

4.

Keep hair, loose clothing, fingers, 

feet and all parts of body away from 
openings, rotating agitator and other 
moving parts. 

2

11

Содержание UV219CS









Отзывы: