Shark S4601 Series, Руководство пользователя

Страница: 3 / 16

2 www.sharkclean.com
12.
DO NOT
pull or carry by cord, use cord as
a handle, close a door on cord, or pull cord
around sharp edges or corners. Do not run
Steam Mop over cord. Keep cord away from
heated surfaces.
13.
DO NOT
unplug by pulling on power cord. To
unplug, grasp the plug not the power cord.
Do not use extension cords or outlets with
inadequate current-carrying capacity.
14.
DO NOT
put any objects into the the Steam
Nozzle openings. Discontinue use if the steam
nozzle is blocked.
15.
DO NOT
put hands or feet under the Steam
Mop. It gets very hot.
16. Use ONLY on flat, horizontal surfaces. Do not
use on walls, counters, or windows.
17. DO NOT use on leather, wax-polished furniture,
synthetic fabrics, velvet, or other delicate,
steam-sensitive materials.
18.
DO NOT
add cleaning solutions, vinegar,
scented perfumes, oils, or any other chemicals
to the water used in this Steam Mop as this
may damage it or make it unsafe for use. If you
live in a hard-water area, we recommend using
distilled water in your Steam Mop.
19.
Never leave any Pocket Pad in one spot
while using or storing for any period of
time, as this may damage your surfaces.
20. Carefully remove all Pocket Pads after you have
unplugged and allowed the Steam Mop to cool.
21. When cleaning the exterior of the Steam Mop,
unplug the power cord from the electrical outlet
and clean with a dry or damp cloth. Do not pour
water or use alcohol, benzene, or paint thinner
on the Steam Mop.
22. Extreme caution should be exercised when
using the Steam Mop to clean stairs.
23. Keep your work area well lit.
24. Store Steam Mop indoors in a cool, dry place.
25. To avoid circuit overload, do not operate another
appliance on the same socket (circuit) as the
Steam Mop.
26. To avoid scalding injuries, always unplug and
allow the Steam Mop to cool before removing
or changing Mop Heads, Accessories, or Pocket
Pads.
WARNING:
Your Steam Mop is
designed to clean hard-floor surfaces that will
withstand high heat. Do not use on unsealed
wood or unglazed ceramic floors. On surfaces
that have been treated with wax and on some
no-wax floors, the sheen may be removed
by the heat and steam action. It is always
recommended to test an isolated area of the
surface to be cleaned before proceeding. We
also recommend that you check the use and
care instructions from the floor manufacturer.
SAVE THESE
INSTRUCTIONS