www.sharkclean.com
3
SAVE THESE
INSTRUCTIONS
11.
DO NOT
unplug by pulling on power cord. To
unplug, grasp the plug not the power cord.
Do not use extension cords or outlets with
inadequate current carrying capacity.
12.
DO NOT
put any objects into openings. Do not
use with any opening blocked.
13.
DO NOT
put hands or feet under the steam mop.
Unit gets very hot.
14. Use
ONLY
on flat, horizontal surfaces. Do not
use on walls, counters or windows.
15.
DO NOT
use on leather, wax polished furniture
or floors, synthetic fabrics, velvet or other
delicate, steam sensitive materials.
16.
DO NOT
add cleaning solutions, scented
perfumes, oils or any other chemicals to the
water used in this appliance as this may damage
the unit or make it unsafe for use. If you live in a
hard water area, we recommend using distilled
water in your steam mop.
17. When in use, NEVER turn the appliance over or
on its side.
18.
NEVER LEAVE THE STEAM MOP IN
ONE SPOT ON ANY SURFACE FOR ANY
PERIOD OF TIME WHEN THE CLEANING
PAD IS ATTACHED AS THIS WILL
DAMAGE YOUR FLOORS.
19. Carefully remove the cleaning pad immediately
after you have finished using the steam mop.
20. When cleaning the steam mop, unplug the
power cord from the electrical outlet and clean
with a dry or damp cloth. Do not pour water
or use alcohol, benzene or paint thinner on the
unit.
21. Extreme caution should be exercised when using
this appliance to clean stairs.
22. Never use steam mop without the cleaning pad
attached.
23. Keep your work area well lit.
24. Store steam mop indoors in a cool, dry place.
25. To avoid circuit overload, do not operate another
appliance on the same socket (circuit) as the
steam cleaner.
26. If an extension cord is absolutely necessary, an
extension cord rated a minimum of 15 ampere,
14 gage cord should be used. Cords rated for
less amperage may overheat. Care should be
taken to arrange cord so that it cannotbe pulled
or tripped over.
27.
DO NOT
leave unattended when the system is
connected to a power supply/electrical outlet.
28
DO NOT
store unit with damp/wet cleaning
pad attached.Never leave the steam mop in one
spot on any surface for any period of time with
a damp or wet cleaning pad attached as this will
damage your floors.
WARNING:
Your steam mop is
designed to clean hard floor surfaces that will
withstand high heat. Do not use on unsealed
wood or unglazed ceramic floors. On surfaces
that have been treated with wax or some no wax
floors, the sheen may be removed by the heat
and steam action. It is always recommended to
test an isolated area of the surface to be cleaned
before proceeding. We also recommend that you
check the use and care instructions from the floor
manufacturer.