1. 8 0 0 .7 9 8 .7 3 9 8
9
10
w w w. shar k ninjamanuals .com
CLIC
K
CANISTER CLEANING
Convert your upright to a convenient canister
1
From Lift-Away
™
mode, place the pod onto the canister
caddy�
NOTE
: To release pod from canister caddy, press
LIFT-AWAY and lift up�
2
Cleaning in POWERED Lift-Away
™
mode allows you to
still use the motorized floor nozzle�
3
Press the WAND RELEASE or HANDLE RELEASE
button� Lift the handle up and attach preferred
accessory�
TIP
Use the posts on the canister caddy to store additional
cleaning accessories�
STEP 1
STEP 2
STEP 3
RECOMMENDED FILTER CLEANING SCHEDULE:
Pre-motor Filter Kit (Foam & Felt):
XFF680
Every 3 months
Post Motor Filter:
XHF680
Every year
EMPTY THE DUST CUP
1
Pull up on the dust cup release latch and lift the dust cup
off the pod�
2
Holding the dust cup over a garbage bag or can, press the
bottom empty release latch�
3
Press the top dust cup release latch to access the dust
screen and remove built-up debris as required�
CLEAN THE FILTERS
1
With the dust cup removed, remove and rinse the foam
and felt filters every 3 months� Let air dry completely
before replacing� Hand wash only� Tap loose dirt off
filters between washes as needed�
2
Once a year open the filter grill and remove and
rinse the HEPA filter� Let air dry completely before
replacing� Hand wash only�
WARNING: DO NOT PICK UP FIREPLACE ASH
OR DRYWALL DUST.
MAINTENANCE
To keep your vacuum’s suction power optimal, follow these instructions.
Make sure unit is off and cord unplugged.
IMPORTANT: Allow ALL filters to dry completely before replacing into the vacuum.
STEP 1
STEP 2
STEP 3
HEPA
FELT FILTER
FOAM FILTER
FILTER FRAME
