1. 8 0 0 .7 9 8 .7 3 9 8
5
6
w w w. shar k ninjamanuals .com
UPRIGHT CLEANING
WARNING: To reduce the risk of electric shock, unplug the unit before assembling, adding or removing
attachments or converting modes.
WARNING: Always ensure the power is OFF before plugging and unplugging.
NOTE:
DO NOT use to pick up drywall dust or fireplace ash�
STEP 1
STEP 2
STEP 3
1
Plug in power cord into electrical outlet and press
POWER button to turn vacuum on�
2
Hard Floor Cleaning
Set Floor Selector to
Hard Floor
and Suction Control
to
Max
for full suction or variable depending on user
preference� Both the motorized floor nozzle and the Shark
Dust Away
™
heads can be used on hard floors�
Thick Carpet & Area Rugs Cleaning
Set Floor Selector to
Carpet
and Suction Control to
Min
for reduced suction or variable depending on user
preference�
Carpet Cleaning
Set Floor Selector to
Carpet
and Suction Control to
Max
for full suction or variable depending on user preference�
3
Place your left foot gently on the floor nozzle and tilt the
handle back to start cleaning� Note: The brushroll will
only spin once the vacuum is reclined back�
Suction Control
Floor Selector
Min
Max
ABOVE FLOOR CLEANING
NOTE:
DO NOT use to pick up drywall dust or fireplace ash�
1
For above floor cleaning with the hose, press the WAND or
HANDLE release (depending on the amount of reach required)
then lift handle up�
2
Insert wand or handle directly into desired tool�
3
This unit is equipped with SUCTION CONTROL to help when
dusting delicate objects or drapery� Located at base of the
handle, slide the SUCTION CONTROL tab to minimize suction�
Be sure to close again for maximum suction�
OR
STEP 1
STEP 2
STEP 3
Wand Release
OR
Suction Control
Min
Max
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
•
Solid Green:
The brushroll is on and working as it should�
•
Solid Red:
There is a jam in the brushroll area� Turn your vacuum off and remove the blockage�
•
*Flashing Red:
The motorized floor nozzle is overheating� Turn your vacuum off and wait for it to cool down�
*See Troubleshooting section for further instructions�
