17
AUS 1800 099 385 NZ 0800 112 660
18
AUS sharkclean .com . au NZ sharkclean .co. nz
WARNING: Hand
wash filters with
water only to prevent
damage from
cleaning chemicals�
Allow ALL filters
to dry completely
before replacing
in the vacuum to
prevent liquid from
being drawn into
electric parts�
CAUTION: Turn power
off and unplug before
servicing�
IMPORTANT:
Clean the
dust screen inside the
dust cup as required�
NOTE:
Empty dust cup
when debris reaches
the MAX fill line�
MAINTAINING YOUR VACUUM
EMPTYING THE DUST CUP
1
Press the Wand Release button on the top of the
wand to disconnect the handheld vacuum from
the wand�
OR
To remove the dust cup from the handheld vacuum,
squeeze the two Dust Cup Release buttons on both
sides of the base at the same time, then pull out
the dust cup�
CLEANING THE FILTERS
1
Access the Pre-Motor foam and felt
filters by lifting the latch on the top
of the handheld vacuum� Remove
and rinse the filters with water� Tap
loose dirt off filters between washes
as needed� Once completely dry,
insert the felt filter first, then place
the foam filter on top of it�
2
Access the Post-Motor filter under
the handle� Remove and rinse the
filter with water�
2
Hold dust cup over a trash bin and
press the Empty button on the front
of the dust cup� The bottom lid will
open, allowing the debris to fall out�
3
Once dust cup is empty, close the
bottom lid and insert dust cup back
into handheld vacuum until you hear
it click into place�
Post-Motor filter
Pre-Motor filters
Foam
Felt
RECOMMENDED
FILTER CLEANING
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
XFFH380
Clean once a month�
Post-Motor Filter
XPSTFH380
Clean once a year�
Empty
Empty
Dust Cup
Release
Clean Filter
Содержание Rocket DuoClean HV380ANZMN Series
Страница 1: ...HV380ANZMN Series OWNER S GUIDE ...