10
sharkclean .co.uk
11
sharkclean .co.uk
OPERATING THE VACUUM
OPERATING THE VACUUM
Press power button to turn the vacuum
on or off. Please note the
brush-roll
will
not spin unless the wand is reclined.
WHAT DOES THE BRUSH-ROLL INDICATOR LIGHT MEAN?
Solid Green:
The brush-roll is spinning and working as it should.
Solid Red:
There is a jam in the brush-roll area. Turn your vacuum off and remove any blockages in the nozzle.
Flashing Red*:
The motorised floor nozzle is overheating. Turn your vacuum off and wait a minimum of
60 minutes for it to cool down.
* See Troubleshooting section for further instructions.
Slide the selector switch to the appropriate surface
setting:
Thick Carpet & Area Rug Cleaning:
Set Floor
Selector to
Carpet
and slide Suction Control
toward
Min
to reduce suction.
Carpet & Low Pile Cleaning:
Set Floor Selector to
Carpet
and slide Suction Control toward
Max
to
increase suction.
Hard Floor Cleaning:
Set Floor Selector to
Hard
Floor
and slide Suction Control toward
Max
to
increase suction.
POWER
INDICATOR LIGHT
SURFACE SETTINGS
SETTINGS
BRUSH-ROLL INDICATOR LIGHT
NOTE:
All accessories are compatible with both the wand and the handle.
CLEANING MODES
To engage brush-roll, turn on
power, then step on the floor
nozzle and tilt the handle back.
Press the
Wand Release
button
to detach the wand from the pod.
With pod removed, press the
Wand Release
button to detach
the wand from the floor nozzle.
Press the
Handle
button to detach
the handle from the wand.
With pod removed, press the
Handle
button to detach the
handle from the wand.
Press the
Lift-Away®
button to
detach the pod from the floor nozzle.
UPRIGHT
ABOVE-FLOOR—HANDLE
LIFT-AWAY®—HANDLE
POWERED LIFT-AWAY®
ABOVE-FLOOR—WAND
LIFT-AWAY®—WAND
Wand Release
Wand Release
7 8
Max Min
NOTE:
Brushbar will continue to
spin in all modes
