4
ASSEMBLY
1
Place the vacuum body onto power nozzle.
2
Insert extension wand into top of the vacuum.
3
Insert handle into the top of the extension wand (if not already assembled).
4
Insert hose into hose connector.
5
Insert the crevice tool and dusting brush onto the accessory holder as shown.
6
The accessory holder is removable. To remove, first remove the dust cup (as explained on page 9), then hold and pull the tab to the left
and pull out. To replace, align the pins into the hinge on the vacuum and clip back into place.
CLICK
1
5
3
CLICK
2
4
CLICK
CLICK
6
