sharkclean .com
sharkclean .com
EMPTYING THE DUST CUP
To remove
Dust Cup
, lift tabs on both sides of
dust cup handle. Tilt dust cup forward, then
lift to remove.
To reinstall, place bottom of dust cup into
pod and then tilt back until it clicks into place.
Press lower release button to open bottom of
dust cup.
To remove collected debris from
Lint Screen
,
press top release button and lift handle to
open. Gently brush lint screen to clean.
CLEAN HEPA FILTER
EVERY YEAR
Press button at bottom of
Filter Door
. Tilt
Filter Door
and lift out. Remove
HEPA Filter
.
To reinstall, insert HEPA filter into unit and
replace the filter door.
CLEAN PRE-MOTOR FILTERS
EVERY 3 MONTHS
Remove
Dust Cup
, then lift out
Filters
.
Regularly clean and replace your filters to keep your vacuum's suction power optimal.
To clean filters, rinse with cold water only to prevent damage from cleaning chemicals. Allow all
filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn
into electric parts.
CLEANING AND REPLACING THE FILTERS
CLEANING FILTERS
IMPORTANT:
DO NOT
use soap when cleaning the filters.
IMPORTANT:
Unplug the power cord before performing any maintenance.
Filter
Door
