sharkclean .com
sharkclean .com
Clean off any debris on the bristles.
Using a coin, turn locks counterclockwise to open, then lift off cover to access
Brushroll
.
If you run over a
hard or sharp
object or notice
a noise change while vacuuming, check for
blockages or objects caught in the brushroll.
Clear away any dust, dirt, or blockages in
Debris Intake
.
To close the cover, push down until it clicks into
place, then close the locks with a coin.
DEBRIS WRAPPED AROUND BRUSHROLL
DEBRIS BEHIND BRUSHROLL
CLEANING THE BRUSHROLL
MAINTENANCE
CHECKING FOR BLOCKAGES
Detach hose from vacuum pod, and check hose
and opening on back of pod for blockages.
Detach wand from floor nozzle and handle, and
check both ends for blockages.
Detach wand from floor nozzle, tilt nozzle neck
back, and check opening for blockages.
Detach handle from wand and hose from the
vacuum pod, and check openings for blockages.
Detach dust cup from vacuum pod. Empty dust
cup, remove debris from lint screen, and check for
blockages.
NOTE:
If any hair is wrapped around the brushroll,
extending cleaning time will allow Zero-M™ technology to
remove it for you. If some fibers remain wrapped around
brushroll after continued use, carefully cut debris with
scissors and remove from brushroll.
Zero-M
™
Technology
Zero-M Technology™ actively removes hair wrap from your brushroll while you vacuum, with
uncompromised cleaning power. If you run over a hard or sharp object or notice a noise change
while vacuuming, check for blockages or objects caught in the brushroll.
NOTE:
Do not be alarmed if there is visible hair at any given time, as it will eventually make its way
to the dust cup.
™
