background image

sharkclean .com

sharkclean .com

SAVE THESE INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

IMPORTANT SAFETY INSTRUCTIONS

HOUSEHOLD USE ONLY

To reduce the risk of electric shock, this vacuum cleaner has a polarized  

plug (one blade is wider than the other). As a safety feature, this plug will 

fit into a polarized outlet only one way. If the plug does not fit fully into the 

outlet, reverse the plug. If it still does not fit, contact a qualified electrician.  

DO NOT force into outlet or try to modify to fit.

   WARNING 

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY: 

GENERAL WARNINGS
When using an electrical appliance, 

basic precautions should always be 

followed, including the following:
1. 

 Inspect power cord and plug 

for any damage before use. 

DO 

NOT

 use vacuum cleaner with a 

damaged cord or plug. Turn off 

all controls before plugging in or 

unplugging the vacuum cleaner. 

Store your vacuum cleaner with the 

power cord secured around the two 

cord hooks. To minimize the risk of 

power cord damage, do not allow 

the motorized brush roll to ingest the 

cord.  If this occurs, immediately shut 

off power to the vacuum and remove 

the cord.

2.  

Your vacuum cleaner may consist of 

a motorized nozzle, wand, hose, and/

or vacuum pod.  This device contains 

electrical connections, electrical 

wiring, and moving parts that 

potentially present risk to the user.

3.  

Use only identical replacement parts.

4.

   Carefully observe and follow 

the instructions provided below 

to avoid improper use of the 

appliance. 

DO NOT

 use the vacuum 

for any purpose other than those 

described in this manual.

5.

   Before use, carefully inspect all 

parts for any damage. 

DO NOT

  

use if any parts are damaged.

6. 

 The use of an extension cord is  

NOT

 recommended.

7.  

This vacuum cleaner contains  

no serviceable parts.

 

USE WARNINGS
8.  

This appliance can be used by 

persons with reduced physical, 

sensory or mental capabilities or 

lack of experience and knowledge 

if they have been given supervision 

or instruction concerning use of 

the appliance in a safe way and 

understand the hazards involved. 

Cleaning and user maintenance shall 

not be made by children. Keep the 

appliance and its cord out of reach of 

children. 

DO NOT

 allow the appliance 

to be used by children. 

DO NOT

 allow 

to be used as a toy. Close supervision 

is necessary when used near children.

9. 

 Always turn off the vacuum cleaner 

before connecting or disconnecting 

any motorized nozzles or other 

accessories.

10.   DO  NOT

 handle plug or vacuum 

cleaner with wet hands.

11. 

 

DO NOT

 use without filters in place.

12. 

 Only use Shark® branded filters  

and accessories. 

13.

  

DO NOT

 damage the power cord:

 a) 

 

DO NOT

 pull or carry vacuum 

cleaner by the cord or use the 

cord as a handle.

 b) 

 

DO NOT

 unplug by pulling  

on cord. Grasp the plug, not  

the cord.

 c) 

 

DO NOT

 run the vacuum cleaner 

over the power cord, close a 

door on the cord, pull the cord 

around sharp corners, or leave 

the cord near heated surfaces.

14. 

 

DO NOT

 put any objects into nozzle 

or accessory openings. 

DO NOT

 use 

with any opening blocked; keep free 

of dust, lint, hair, and anything that 

may reduce airflow.

15.   DO  NOT

 use if nozzle or accessory 

airflow is restricted. If the air 

paths or the motorized floor 

nozzle become blocked, turn the 

vacuum cleaner off and unplug 

from electrical outlet. Remove all 

obstructions before you plug in  

and turn on the unit again.

16.  

Keep nozzle and all vacuum 

openings away from hair, face, 

fingers, uncovered feet, or  

loose clothing.

17.   DO  NOT

 use if vacuum cleaner is  

not working as it should, or has 

been dropped, damaged, left 

outdoors, or dropped into water.

18.  

Use extra care when cleaning  

on stairs.

19.   DO  NOT

 leave the vacuum cleaner 

unattended while plugged in.

20.  

When powered on, keep the 

vacuum cleaner moving over the 

carpet surface at all times to avoid 

damaging the carpet fibers.

21.   DO  NOT

 place vacuum cleaner  

on unstable surfaces such as chairs 

or tables.

22.  

Your Shark® vacuum may not  

be designed to stand up on its own. 

When taking a break from cleaning, 

you may need to lean it against 

furniture or a wall, or lay it flat  

on the floor. Using the vacuum  

for an application where the unit 

lacks stability may result in  

personal injury.

23.   DO  NOT

 use to pick up:

 

 a) 

 Liquids

 

 b) 

 Large  objects

 

 c)   

Hard or sharp objects  

(glass, nails, screws, or coins)

 

 d)   

Large quantities of dust (drywall 

dust, fireplace ash, or embers). 

DO NOT

 use as an attachment to 

power tools for dust collection.

 

 e)   

Smoking or burning objects  

(hot coals, cigarette butts,  

or matches)

 

 f) 

 Flammable or combustible 

materials (lighter fluid, gasoline, 

or kerosene)

 

 g)   

Toxic materials (chlorine bleach, 

ammonia, or drain cleaner)

24. DO NOT

 use in the following areas:

  a)  

Poorly lit areas

  b)  

Wet or damp surfaces

  c)  

Outdoor areas

 

d)  

Spaces that are enclosed and 

may contain explosive or toxic 

fumes or vapors (lighter fluid, 

gasoline, kerosene, paint, 

paint thinners, mothproofing 

substances, or flammable dust)

25.  

Turn off all controls before plugging 

in or unplugging the vacuum.

26. 

 Unplug from electrical outlet  

when not in use and before  

any maintenance or cleaning.

27.  

Hand wash with water only.  

Washing with cleaning chemicals 

could damage the unit.

28. 

 During cleaning or routine 

maintenance, 

DO NOT

 cut anything 

other than hair, fibers, or string 

wrapped around the brushroll.

29.  

Allow all filters to air-dry completely 

before replacing in the vacuum to 

prevent liquid from being drawn  

into electric parts.

30.  

Make sure the dust cup and all 

filters are in place after routine 

maintenance.

31.  

If provided, secure the power  

cord around the two cord hooks 

during storage.

Содержание Navigator Lift-Away NV380 Series










Отзывы: