sharkclean .com
sharkclean .com
AVAILABLE ACCESSORIES
TROUBLESHOOTING
Power cord caught in brushroll or floor nozzle.
•
To minimize the risk of power cord damage, DO NOT run the vacuum over the power cord.
If this occurs, immediately shut off power to the vacuum and remove the cord from the
brushroll or nozzle.
•
Inspect power cord and plug for any damage before use. DO NOT use vacuum cleaner with
a damaged cord or plug. Turn off all controls before plugging in or unplugging the vacuum
cleaner. Store your vacuum cleaner with the power cord secured around the two cord hooks.
Vacuum is not picking up debris. No suction or light suction.
•
Check filters to see if they need cleaning. Follow instructions for rinsing and air-drying the
filters before reinstalling.
•
Dust cup may be full; empty dust cup.
•
Clear any blockages in the hose, hose connections, nozzle, wand, pod, or accessories. See
Checking for Blockages section for more information.
•
If any hair is wrapped around the brushroll, continue vacuuming. This will allow the self-
cleaning brushroll to remove the hair wrap and send it to the dust cup. If some fibers remain
wrapped around the brushroll after continued use, open the brushroll cover to remove them.
Vacuum lifts area rugs.
•
Make sure Power/Surface switch is set to Bare Floor (setting I).
•
Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.
•
To minimize suction, set the suction control slider to MIN. See the Suction Control section
for more information.
Brushroll does not spin.
•
If the Brushroll Indicator Light turns red, immediately turn off and unplug the vacuum.
Remove pod from floor nozzle and clear any blockages. Reconnect nozzle, plug in vacuum,
and turn on power.
•
With the power on, recline the handle, which will automatically turn on the brushroll.
Vacuum turns off on its own or indicator light flashes red.
If your vacuum overheats, the thermostat will automatically turn off the motor. Follow these
steps to restart:
1. Turn vacuum off and unplug it.
2. Empty dust cup and clean filters (see Emptying the Dust Cup and Cleaning the Filters).
3. Check for blockages in hose, wand, nozzle, accessories, and inlet openings.
4. Allow unit to cool for a minimum of 60 minutes.
5. Plug in vacuum and turn it on.
For all other issues, please visit our website at sharkclean.com/support.
B
E
G
A
Crevice Tool
Clean in corners and other tight spaces or
reach baseboards and ceilings with this slim
crevice tool.
B
Upholstery Tool
Picks up hair, dust, and large debris from
mattresses, couches, curtains, lampshades, and
other delicate upholstered fabrics.
C
Dusting Brush
This brush dusts and cleans delicate surfaces. Great
for use on fans, blinds, lampshades, and keyboards.
D
Anti-Allergen Dust Brush
This brush features nylon fiber bristles specifically
designed for removing fine dust and allergen
particles from the most delicate surfaces.
E
Pet Power Brush
The turbine brush loosens and removes pet hair
and debris from carpets, and powerfully deep-
cleans dander out of upholstery and other surfaces.
F
Home & Car Detail Kit
Deep-clean your car like a professional detailer,
or clean hard-to-reach areas in your home. Micro-
sized tools let you clean around delicate objects
and access the tightest spaces like car vents and
computer keyboards.
G
Duster Crevice Tool
Two cleaning tools in one. The crevice tool gives
you extended reach to clean in tight spaces,
while the soft brush is ideal for dusting delicate
surfaces.
H
Under-Appliance Wand
Clean under and behind hard-to-move appliances
and furniture with this adjustable 36" tool. Flip
the extension piece over to clean the underside of
appliances.
I
Large Accessory Bag
This convenient accessory storage bag measures
32 cm x 70 cm and fits the Under-Appliance Wand.
Smaller size available at sharkaccessories.com.
I
F
H
C
A
NOTE:
Not all accessories come with all units. For a list of the accessories included with this model, see the top
inside flap of the box. To order additional accessories, visit
sharkaccessories.com
.
D
