6
7
10
Using the same back and forth motion, continue to
go over the same area without spray. For heavily
soiled high traffic areas or dingier carpets you may
need to go over the area for several minutes, spraying
periodically. Spray more solution as needed while
cleaning. Repeat as necessary until the entire carpeted
area has been cleaned. No rinsing is required.
11
If the Reusable Bottle is empty, you can refill it at
any time as long as the
Shark
®
Sonic Duo
™
Floor
Cleaner
is unplugged from the outlet.
12
Once finished, step on the tag of the Carpet Scrub‘n
Stain
™
Pad and lift the unit to remove the Carpet
Scrub‘n Stain
™
Pad from the
Shark
®
Sonic
Duo
™
Floor Cleaner
(Fig. 21)
. Let the carpet dry
thoroughly and then vacuum.
SPOT & STAIN CLEANING
Please note that not all carpets react to the
Shark
®
Sonic Duo
™
Floor Cleaner
the same way. Some carpets
will require more time and cleaning solution than others.
Step 1:
1
Vacuum the stained or discolored area to remove any
loose dirt, dust, or debris that may have accumulated
in your carpet.
Step 2:
2
Begin by pretreating the stain with the Activating
Pretreater Carpet Stain & Odour Remover until the
stain or discoloration is fully saturated.
3
Let sit for 5-10 minutes.
4
Use a white cloth with a blunt object to blot up the
stain.
5
You will see the stain begin to transfer from the
carpet onto the white cloth.
6
Continue to use fresh areas of the white cloth as you
blot up more and more of the stain.
7
Never rub.
8
Repeat as necessary.
6
Screw the bottle cap on tightly and insert the
Reusable Bottle into the unit. Push it down to
make sure that it is well inserted. You will hear an
audible “Click” when the Reusable Bottle is inserted
properly.
(Fig. 17)
7
Twist the quick cord release holder to unwrap
the power cord completely.
(Fig 18)
Plug into an
electrical outlet and slide the “ON/OFF” button to
turn the
Shark
®
Sonic Duo
™
Floor Cleaner
on.
Select the faster Carpet Mode (II).
(Fig 19)
8
Lightly step on the back of the scrubbing head to
release the handle.
WARNING:
Never stand on the
Shark
®
Sonic Duo
™
Floor Cleaner
.
9
Begin cleaning by pressing the Spray Button to
apply the cleaning solution to the carpet that is to be
cleaned.
(Fig. 20)
Spray the solution continuously
while pushing the unit forward and then pulling it
backward several times until the area to be cleaned
is damp.
NOTE:
The first time that you use the
Shark
®
Sonic
Duo
™
Floor Cleaner
there may be air in the system
causing a delay for the solution to come out of the
spray nozzle. Hold the spray button down for 5 to 10
seconds until you see the solution spray out.
Frequently Asked Questions
Q.
I noticed a rippling effect on the edges of my area rugs
– should I be concerned?
A.
Wool area rugs sometimes have a rippling effect
on the edges after cleaning. This rippling will relax
our after a few days of regular wear and usage.
Q.
After using the Low Moisture –No Rinse- Carpet
Cleaner, my carpet feels dry and crunchy – what can
I do?
A.
If your carpets feel crunchy, you likely used too much
of the Low Moisture – No Rinse- Carpet Cleaner.
The dry crunchy feeling will go away after a few days
of normal wear and usage. Another pass vacuuming
should also help break up the crunchy texture more
quickly. To avoid this from happening again, we
recommend using less solution on one specific area
or a less concentrated dilution.
Q.
How can I remove tough stains?
A.
Begin by treating the stain with the Activating
Pretreater until fully saturated. Let sit for 5-10
minutes. Next, use a white cloth with a blunt object
to blot up the stain. You will see the stain transfer
from the carpet onto the white cloth. Continue to
use fresh areas of the cloth as you blot up more and
more of the stain. Never rub. Repeat as necessary.
fig. 17
fig. 18
fig. 19
fig. 20
fig. 21
Using Your Sonic Duo
™
Floor Cleaner - cont.
