sharkclean .com
sharkclean .com
CLEANING SENSORS AND CHARGING PADS
CLEANING SIDE BRUSHES
MAINTENANCE
Carefully unwind and remove any string or hair
wrapped around brushes.
Gently wipe brushes with a damp cloth. Be sure to
let them air-dry completely before reinstalling them.
CLEAN SENSORS AND CHARGING PADS PERIODICALLY AS NEEDED.
With a dry cloth or cleaning brush, gently dust off
the sensors and pads located on the bottom of the robot.
NOTE:
Remove any side brushes that are bent or damaged. To remove a brush, lift it off its peg. See
Installing the Side
Brushes
for instructions on how to attach and remove the brushes.
IMPORTANT:
The robot uses cliff sensors to avoid stairs and other steep drops. Sensors may work less effectively when
they are dirty. For best results, clean sensors regularly.
NOTE:
Leverage may be required to remove the wheel.
CLEAN SIDE BRUSHES AS NEEDED. CHECK WEEKLY.
RECOMMENDED REPLACEMENT SCHEDULE:
Replace when visibly worn. See sharkaccessories.com for replacement parts.
CLEANING THE WHEELS
MAINTENANCE
Pull the
Front Caster Wheel
from its housing and
remove any debris buildup.
REMOVE AND CLEAN FRONT WHEEL EVERY WEEK. REPLACE FRONT WHEEL EVERY 12 MONTHS.
See sharkaccessories.com for replacement parts.
Clean the wheel housing, then reinsert the
caster wheel.
Periodically clean the drive wheels and the
housing around them. To clean, rotate each drive
wheel while dusting.
