sharkclean .com
sharkclean .com
USING THE
SHARK ION™ ROBOT
BUTTONS AND INDICATOR LIGHTS
DOCK BUTTON
Press to stop cleaning and
send robot back to the
charging dock.
CHARGE INDICATOR LIGHTS
Display the amount of charge
remaining in the battery.
“!” ERROR INDICATOR
See Troubleshooting section
for full list of error codes.
WI-FI INDICATOR
Blue light: connected to
Wi-Fi.
Red light: not connected.
Flashing blue: setup mode.
No light: not set up yet.
CLEAN BUTTON
Press to begin a cleaning
session. Press again to stop.
MAX BUTTON
Press for more powerful
cleaning.
CHARGING THE SHARK ION™ ROBOT
IMPORTANT:
Before cleaning an entire room for the first time, we recommend that you first test your robot on a small
section of the floor to ensure there is no scratching.
NOTE:
If the low charge light is blinking red, there is not enough charge for the robot to return to the dock. Manually
place the robot on the dock.
TIP:
To preserve battery life, turn off the power switch if robot will not be used for a long period of time. Unit should be
recharged at least once every three months.
CHARGE INDICATOR LIGHTS
The blue charge indicator lights show how much
charge is remaining.
While the robot is charging, all three blue LED lights
will cycle. When charging is complete, all three blue
lights will illuminate steadily.
If the robot is idle and away from the charging dock
for 10 minutes, it will enter
Sleep Mode
, and the lights
will turn off and these indicator lights will turn off, but
Clean will remain lit. Wake up the robot by pressing
any button.
Low Charge
Mid Charge
Nearly Full
Full Charge
Flashing Red
Critically Low
Low Charge
Mid Charge
Nearly Full
Full Charge
Flashing Red
Critically Low
Low Charge
Mid Charge
Nearly Full
Full Charge
Flashing Red
Critically Low
In Use
While
Charging
No Charge
or Off
Low Charge
Mid Charge
Nearly Full
Full Charge
Flashing Red
Critically Low