sharkclean .com
sharkclean .com
USING THE SHARK ION™ ROBOT
MANUAL CLEANING MODE
To manually start a cleaning cycle, press the
Clean
button on the robot or on the mobile app. To stop
the robot before it finishes cleaning and automatically
returns to the dock, press the button again.
INSTALLING THE SIDE BRUSHES
The 2 included side brushes snap onto the square
pegs on the bottom of the robot. Press brushes
down onto the pegs until they click into place.
IMPORTANT:
Before cleaning an entire room for the first time, we recommend that you first test your robot on a small
section of the floor to ensure there is no scratching.
IMPORTANT:
Robot uses cliff sensors to avoid stairs and other steep drops. Sensors may work less effectively when they
are dirty. For best results, clean sensors regularly.
TIP:
To preserve battery life, turn off the power switch if robot will not be used for a long period of time.
TIP:
To preserve battery life, unit should be recharged at least once every three months.
USING THE SHARK ION™ ROBOT
USING THE SHARK ION ROBOT APP AND VOICE CONTROLS
DOWNLOADING THE SHARK ION ROBOT APP
Follow the steps below or scan the QR code to go directly to the download page.
SETTING UP VOICE CONTROL WITH THE GOOGLE ASSISTANT OR AMAZON ALEXA
Visit sharkclean.com/app for setup instructions.
VOICE CONTROL COMMANDS FOR THE GOOGLE ASSISTANT OR AMAZON ALEXA:
The Shark ION Robot app will guide you through easy setup of your Shark ION Robot.
Control the unit remotely:
• Schedule cleaning times for up to 7 days a week.
• Start, stop, or dock your Shark ION Robot from your phone anywhere with Wi-Fi connectivity.
The app will also provide you access to:
• Tips, Tricks, and FAQs
• Tech Support
• Troubleshooting
Android:
• Tap on the Google Play Store icon
• In the Play Store, search for
“Shark ION Robot”
• Tap on the Shark ION Robot app
• Tap install on the Shark ION Robot app page
• Your installation should begin
OR
Type the address below into your
web browser: bit.ly/shark-droid
Google Assistant:
“OK Google, tell Shark to start cleaning.”
“OK Google, tell Shark to pause my robot.”
“ OK Google, tell Shark to send my robot to
the dock.”
Apple:
• Tap on the App Store icon
• Search the Apple App Store for
“Shark ION Robot”
• Tap on the Shark ION Robot app
• Tap Install on the next page
• Your installation should begin
OR
Type the address below into your
web browser: bit.ly/shark-ios
Amazon Alexa:
“Alexa, tell Shark to start cleaning.”
“Alexa, tell Shark to pause my robot.”
“ Alexa, tell Shark to send my robot to
the dock.”
