sharkclean .com
sharkclean .com
5 ft.
3 ft.
3 ft.
CHARGING THE SHARK ION
TM
ROBOT
CHARGING THE SHARK ION
TM
ROBOT
IMPORTANT:
The Shark ION Robot has a pre-installed rechargeable battery. Battery must be fully charged
before using.
Place the
Charging Dock
on a level surface with its back against a wall, in a space without obstructions, that
can easily be accessed by your robot. Remove any objects that are closer than 3 feet (1 meter) from either
side of the dock, or closer than 5 feet (1.52 meters) from the front of the dock. Plug the
Charging Adapter
into a wall outlet. The dock must be plugged in continually for the robot to find it. The robot will beep when
it starts charging on the dock.
The power must be ON in order to charge the battery.
Press the
Power
button on the side of the robot.
If the robot has no charge and cannot return to the
charging dock, place it on the dock manually.
When the cleaning cycle is complete, or if the battery
is running low, the robot will begin to search for
the dock. If the unit doesn’t return to the dock, the
battery charge may have run out.
The blue
Charge Indicator Lights
show how much charge is remaining.
CHARGING DOCK
CHARGING
CHARGE INDICATOR LIGHTS
While the battery is charging, all three blue LED
lights will cycle until charging is complete.
If all the indicator lights are off, then either the
power switch is turned OFF or there is no charge
remaining. Turn the power switch ON. If all
indicator lights remain off, then charge the unit
on the dock.
No Charge
Full Charge
Low Charge
Mid Charge
Nearly Full
Full Charge
No Charge
Full Charge
Low Charge
Mid Charge
Nearly Full
Full Charge
In Use
While
Charging
