sharkclean .com
sharkclean .com
NOTE:
To order replacement parts and filters, visit
sharkaccessories.com
.
Replacement Pre-Motor
Foam & Felt Filter Kit
XFFK160
Replacement HEPA Filter
XHEPA160
Perform maintenance on your HEPA filter once a year to keep your vacuum's suction power optimal.
IMPORTANT:
Rinse HEPA filter with water ONLY.
DO NOT
use soap. Allow to completely air-dry for at
least 24 hours before reinstalling.
DO NOT
scrub HEPA filter.
Follow the previous instructions for removing filters. The
Pre-Motor Filter
should be replaced every
2.5 years. The
HEPA Filter
should be replaced every 3 years.
MAINTENANCE
CLEANING HEPA FILTER
(ONCE A YEAR)
REPLACING FILTERS
1.
Pull up on
HEPA Filter
access tab to remove.
2.
Rinse filter with water ONLY and let air-dry for
24 hours before reinstalling.
3.
When dry, reinsert
HEPA Filter
and press down
until it clicks into place.
P
u
ll t
o
A
cc
es
s H
EP
A F
ilte
r
HEPA
Filter
1.
Slide down
Filter Door
release button.
2.
Tilt filter door and lift off.
3.
Remove filter from pod. Pull filter off frame.
4.
Rinse filter and filter frame with water ONLY.
5.
Once completely dry, reinsert filter onto
filter frame.
6.
While holding the tabs on the frame, slide the
filter back completely to secure into place.
7.
Reinsert bottom of filter door into slots on pod.
Tilt door to close, pressing until it clicks into place.
Perform maintenance on your filters once a month to keep your vacuum's suction power optimal.
IMPORTANT:
Rinse pre-motor filter and frame with water ONLY.
DO NOT
use soap. Allow to completely
air-dry for at least 24 hours before reinstalling.
Your vacuum comes equipped with three filters located on the vacuum pod: two pre-motor filters and
one HEPA filter to capture and trap dust and debris.
MAINTENANCE
CLEANING PRE-MOTOR FILTER
(ONCE A MONTH)
Clean
Filte
rs
Mont
hly
Filter
Frame
Filter
Filter
Door
