MAINTENANCE
EMPTYING THE DUST CUP
Press the wand release button and lift the
handheld vacuum off the wand.
To remove the dust cup from the handheld
vacuum, squeeze the two
Dust Cup Release
buttons at the same time and pull out the dust
cup.
To reinsert the dust cup back into the handvac,
angle the tip first and then push up until it
clicks into place.
Hold the dust cup over the bin. Press the
Empty
button and pull the dust cup open.
Perform regular maintenance on the filters to keep your vacuum's suction power optimal.
IMPORTANT:
To prevent damage, rinse filters with water
ONLY
.
DO NOT
use soap. Allow filters
to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into
electric parts.
Empty the dust cup each time you vacuum and periodically during cleaning, when debris in
the dust cup reaches the MAX fill line.
MAINTENANCE
CLEANING FILTERS
IMPORTANT:
Unplug the vacuum before performing any maintenance.
IMPORTANT:
Unplug the vacuum before performing any maintenance.
NOTE:
For replacement filters please visit sharkclean.eu
PRE-MOTOR FILTERS
POST-MOTOR FILTER
REPLACEMENT FILTERS
To access the pre-motor filters, press and
pull both filter access tabs on the dust cup
to remove the filter holder. The
Pre-Motor
Filters
should be washed twice a month.
Remove the filter cover on the top of the
handvac to access the post-motor filter. The
Post-Motor Filter
should be washed once
every 9 months.
Empty
Release
Button
Release
Button
Release
Button
Pre-Motor
Filters
Post-Motor Filter
Acces
Empty
Button
45
sharkclean.eu
44
sharkclean.eu
ENGLISH
